Rasptank Only Has One Track Moving, and No Servos Working At All!

1693623611 · Post time 2023-9-25 04:38:02

Edited by 1693623611 at 2023-9-25 04:40 AM

After a succesful installing of the robot kit, GUI, IP address configuartion, and being able to connect to it only one side of the track works? (The left side) And, the servos dont move at all except for the one that controls the claw. It stutters without anything being pressed in controls gui?I have the python code and did everything it needed to do in the installs. What could I have done wrong? The only thing that works is the camera when the robot is linked to the GUI.

1700981335 · Post time 2023-12-8 05:06:38

Check if you have installed rasptank or rasptank_pro software. I had rasptank software on rasptank_pro and got the same result.

1715511036 · Post time 2024-5-18 09:51:39

I have the rasptankpro - 2 in fact - same problem here - I did install the correct rasptankpro software but the track keeps moving and the servos twitch
and not able to control them. DG.

1706090782 · Post time 2024-8-20 18:02:53

Take a look and see if the rasptank or rasptank pro software is installed. I have obtained the identical outcome while using rasptank program on rasptank pro. geometry dash