can i connect a Rasp Pi 3.3v fan to unused servo ports

1620183899

i have a Pi4 from Labists that came with a 3.3v fan which has the two wires red and black. The connectors are to big to fit in the 3.3v input on the RobotHat, can i connect these to unused servo ports on the Hat, and power it that way?

1661222328

Hey buddies I am new here and I want to share some info about the game. The best flagle game for girls and youth are now launched and normally people play this game for a time pass but this game is amazing and I also used to play this game. You guys at least try this game and then tell me how it is.

1661222328

I have searched the website for comfort or efficiency to complete this process and I think this is the most suitable flagle on the site to do it effectively.

1733801186

Yes, you can connect the 3.3V fan to an unused servo port on the RobotHat, as long as the servo port provides a 3.3V output and GND connection. Check the pinout of the servo port to confirm the voltage and ground pins match the red (power) and black (ground) wires of the fan. If they do, it should work fine. Just make sure the fan's power draw doesn't exceed the port's capacity.