Understanding the code

1535826485 · Post time 2018-9-4 22:23:45

Hello,

I assembled the smart car kit a couple of days ago. Some minor issuess but I finally got it working.

I am new to arduino/electronics. I thought starting with a remote control car instead of a drone, to get the hang of it. But even this code looks rather complex. Is the code explained in detail somewhere?

Or should I have started with a less complex starter kit?

tx,

Theo

mmoraes80 · Post time 2018-9-6 00:05:48

Edited by mmoraes80 at 2018-9-6 12:55 AM

Hi Theo, Please take a look at this http://www.adeept.com/forum/foru ... pid=109&fromuid=276
I commented the entire code so you can understand what the code means and what it does.

Good luck and let me know you have questions.

1501915115 · Post time 2018-9-6 17:18:09

Edited by 1501915115 at 2018-9-6 05:27 PM

You can post the code you don't understand, I can explain it for you.

1535826485 · Post time 2018-9-9 02:04:30

Ok thanks guys. I will have look. I also found some basic online manuals. Maybe I'll buy a starters kit set

Adeept · Post time 2021-2-4 11:48:52

1535826485 replied at 2018-9-9 02:04 AM
Ok thanks guys. I will have look. I also found some basic online manuals. Maybe I'll buy a starters ...

Thank you

1629721771 · Post time 2021-8-23 20:50:16

Mine gets to opening the client/py program and up comes the control panel on windows but when I enter the PicarB IP address (which I have found OK on Windows) it stalls saying cannot find Car please try later.?? Puzzled at present. Using a Pi 3B on mine, all python entries up to this stage seemed to go OK,

1629721771 · Post time 2021-8-24 00:21:19

Inserted here the screen image-- server.py just flashes and does nothing as does webserver.py

1629721771 · Post time 2021-8-27 17:58:59

Hoping for some comments from Adeept !!!

1633479439 · Post time 2021-10-6 08:52:00

I purchased the AWR-A Arduino Smart Car Kit containing the Adeept Smart Hub, the 3-Ch Tracking Module, and the 3-Ch WS2812 RGB LED. Does anyone have any sample Arduino Code (WITH COMMENTS) to demonstrate how the Tracking Module and WS2812 Module work (e.g., to follow a line)? I don't want to use the provided wifi interface.