Adeept Smart Car Kit(Compatible with Arduino IDE), Line Tracking, Obstacle Avoidance, OLED Display, Ultrasonic Sensor, IR Wireless Remote Control, DIY

Description

About this item

This Smart Car Kit is designed for teens to learn to coding, building and Robotics. It is developed based on MEGA328P, and it is fully compatible with Arduino IDE. It is the best choice for learning programming and robotics.
Easy to Assemble and Build - Detailed tutorials(320 Pages, 22 Lessons) and complete code are provided. The download link can be found on the card in the box (Paper tutorials are NOT available as the tutorials are updated frequently).
Multiple Control Methods - Wireless remote control by IR remote control; Remote controlled by Android APP.
Multiple Functions - IR/Wi-Fi remote control; Obstacle avoidance; Line tracking; Light Tracing; OLED display; 128 pixel LED dot matrix display; Dual 10mm RGB LED turn signal; Extended WS2812 RGB LED light strip.
【No Extra Charger】Integrated USB-C Charging. Directly charge 18650 batteries via USB-C cable(included). Smart circuit protects against overcharge/overheating. Operate while charging.

Important Tips:
This kit is loose pieces, you need to assemble it yourself!

Lessons:
0001 Adjust the initial angle of the servo
0002 Assemble
001 Introduction of Adeept Robot Control Board
002 Building the Arduino Development Environment
01 Onboard LED
02 Servo Motor
03 Control the Servo through PCA9685
04 How to Control a DC Motor
05 Buzzer
06 Control the RGB LED
07 WS2812 RGB LED
08 Measure Distance
09 Light Tracing
10 Line Tracking
11 OLED Display
12 Control the 16x8 LED Matrix
13 Get battery level infomation
14 IR Remote Control
15 IR Remote Control Car
16 WiFi Remote Control Car
17 Remote Control by Computer
18 Line Tracking Car
19 Light Tracing Car
20 Obstacle avoidance and automatic following

Package List:
1 Set Structure Parts(Acrylic）
1x Adeept Robot Control Board(Based on MEGA328P, fully compatible with Arduino IDE)
1x Adeept 2.4G Remote Control(Based on MEGA328P, fully compatible with Arduino IDE)
1x OLED Display
1x ESP8266 WiFi Module
1x Ultrasonic Module
1x 3-CH Line Tracking Module
1x Light Tracing Module
1x IR Remote Control
1x 16x8 LED Matrix Module
1x WS2812 RGB LED Module
2x Adeept RGB LED Module
3x Servo Motor
2x TT Motor
2x Front Wheel
2x Rear Wheel
4x F624ZZ Bearing
4x F687ZZ Bearing
1x Battery Holder
1x Type-C USB Cable
Other Necessary Accessories(Cables, Nuts, Screws, Copper Standoffs, Nylon Standoffs, Tools, etc.)